Security seal Sprut-7

Locking sealing device Sprut 7 is used for sealing devices used in control and measurement purposes as well as for the sealing of the goods transported, doors, container, electrical cabinets and other objects. Sprut 7 model is different from other series devices Sprut most durable connection of the core and shell, as well as a great information platform, which can be applied not only numbers, but also two rows of letters.

Features Sprut-7 model

- The seal is able to successfully resist any natural calamities that does not harm its mechanical condition and does not damage the cable seals.
- The seal can easily withstand temperature minima and maxima (-50 ° to + 90 °).
- The housing seals made of durable thermoplastic. Only environmentally friendly materials are used in the production of devices.
- The core of the seal is made of high quality polystyrene mass. It does not break down during the installation of the seals and reliably performs the function of a cable lock.
- The core of the seal 7 may have different colors.
- On the seal is enough space to put the code of 7 digits, and the number of sealed items or objects will not be repeated.
- Installation is easy, and the probability of improper installation of a seal - is minimal.
- Housing seals and core are sufficiently strong connection to withstand accidental physical contact. Cable seals can not be removed without damaging the seal design. You will always know that the seal has been removed and the unauthorized access was made to the sealed object.
- On the seal housing can be applied to a logo or a picture of the customer.
- In the production of the cable used galvanic steel.

How to apply number?

1) Only on the latch
2) The main body and the latch
3) In case, the latch and the core
4) On the opposite side of the latches, if desired Customer
5) Application of a barcode is also possible, but only in cases of white fillings

As you are installing?

1) The free end of the rope is passed to the object handle, which you need to put the seal.
2) The second cable end is inserted into the hole to seal the housing.
3) The cable must be tightened by hand until the distance between the seal and sealable subject or the object is less than a centimeter.
4) Lock the four corners of the core is made clockwise.
5) The core must remain either in the horizontal or vertical position along the body of the seal.
6) The core must be inserted all the way into the body seal and break off the protruding part of the device.